ADF Web HD67717-IP-A1 User Manual page 22

Industrial Electronic Devices
SET BACNET ACCESS:
By Pressing the "Set BACnet Access
4).
Figure 4a: "BACnet Set Access
The window is divided in two parts, the
"BACnet Write" that contains the BACnet objects that the converter writes into the slaves.
The means of the fields in the window (Read) are the follows:
In the field "IP Address/ID" the IP address/ID of the slave that contains the data to be read is defined;
In the field "Object Type" the BACnet object to read is defined;
In the field "Instance", the instance number of the object is defined;
In the field "Property" the property to use for the reading is defined;
In the field "NByte the number of bytes reserved for saving the information on internal array is defined;
By checking the field "En
Address (D Adr). These informations are used for make a request to other segments of network;
In the field "D Net" the destination network (from 1 to 65535) is defined;
In the field "D Len" the length of "D Add" field is defined;
ADFweb.com S.r.l.
" button from the main window of SW67717 (Fig. 2), the window "Set BACnet Access" appears (Fig.
BACnet Read" window
"BACnet Read" that contains the BACnet objects that the converter reads from the slaves and
Dest" it is possible to enable the Destination Network (D Net), Destination Length (D Len) and Destination
User Manual BACnet Master / CAN
Document code: MN67717_ENG Revision 1.001 Page 22 of 34