Handicare 1100
18
|
The remotes
The remotes function via infrared. On the backside is a dipswitch for setting a diff erent code.
•
Red cover on the backside means the remote functions on infrared.
•
Orange cover on the backside means the remote functions on radiofrequency (868 Mhz),
this is optional for the 1100.
•
Blue cover on the backside means the remote functions on radiofrequency (915 Mhz),
this is optional for the 1100.
•
Green cover on the backside means the remote functions on radiofrequency (2,4 Ghz),
this is optional for the 1100.
Under this cover you can fi nd a dipswitch to set a diff erent canal.
The infrared remotes work out of the box. If they don't, they can be linked as follows:
If the lift does not travel up or down the stairs when the corresponding remote control buttons are
pressed, follow the pro¬cedure set out next. Drive the lift down and open the unit. Get the adapter
out of the socket and disconnect the PCB. Wait for 30 seconds, and press a button on the remote
control and point it at the PCB. Reconnect the PCB. If the display shows a I<>R (infrared) the
relinking of the remote controls was successful. If the linking was not success full because of causes
such as interference or direct sunlight, install a RF remote control kit. Refi t the adapter in the socket.
F A U L T
Display
Infrared remote control
registered
40
F A U L T
Action
Display
IR
RF
Radio frequency remote
control registered
Action
D