Printed Circuit - Handicare 1100 Quick Reference Manual

17 |

Printed circuit

The printed circuit controls all electrical components in the lift. Once installed and there is power on
the lift, the accelerometer on the printed circuit checks if the lift is right handed or left handed. So it is
not necessary to change anything on the remotes and joystick.
Code " " and "Y" and "d"
If one of these codes are displayed, there is an issue with the printed circuit and it shall be replaced.
ion Display
The main control board has
]
a memory problem
F A U L T
Code AngLE"
The rail is mounted on a stairs > 50˚ or < 25˚
Display
Rail to steep
F A U L T
Action Display Action Display Display
Hardware fault The main power relay not
[ Y0, YF, YI, Yr, Yb, YbF ]
open
F A U L T
Action
Φ
Quick Reference Guide
F A U L T
Action D
F A U L T
39