Table of Contents
Advertisement
EN
28
Technical Parameters
15. TECHNICAL PARAMETERS
Power unit
1 Displacement (cm
2 Fuel:
3 Fuel tank capacity(ml)
4 Chain oil:
5 Oil tank capacity(ml):
6 Carburetor:
7 Ignitionsystem:
8 Spark plug:
9 Oil feeding system:
10 Sprocket (Teeth × Pitch):
11 Dimensions (L × W × H) mm:
12 Dry weight Power unit only (kg):
Cutting heard
13 Guide bar
14
Type:
15
Size:
16 Saw chain
17
Pitch (in.(mm):
18
Gauge(in,(mm)):
Specifi cation are subject to change without notice
If you fi nd that the vibrations being transferred to the handle have become noticeably worse compared to the
condition when the chain saw was new, check the wear on the silentblocks (rubber coated mounting elements)
and if necessary contact an authorised service centre to have them replaced.
ATTENTION! Working with a chain saw with an incorrectly working vibration shock absorption system may
lead to health problems.
3
):
25.4
Mixture (Gasoline 25 : Two-cycle oil 1)
280
Motor oil SAE# 10W-30
200
Diaphragm type
Pointless (CDI)
LD L8RTF
Automatic pump
6T × 3/8"
300 × 260 × 240mm
3.2
Sprocket nose
10"
3/8(9.53)
0.05(1.27)
FZP 25410-B
Advertisement
Table of Contents
