Table of Contents
Advertisement
EN
32
Technical data
15. TECHNICAL DATA
Bar length
Capacity oiltank
Type of oil
Saw chain division
Drive link thickness
Tooth pitch of drive sprocket
Chain brake
Motor
Power
Cutting speed max.
Weight
16. TROUBLESHOOTING
Fault
Motor does not run
Chain does not move
Poor cutting perfor-
mance
Saw works only with
diffi culty Chain jumps
off sword
Chain becomes hot
Possible cause
No electricity
Chain brake
Running out of carbon brush
Chain brake
Blunt chain
Chain tension
Check that the chain is fi tted
correctly
Chain tension
Chain lubrication
405 mm (16")
0,15 l
wear resistant oil
3/8"
1.27 mm
3/8"
yes
230-240 V / 50 Hz
2400 W
15 m/s
5,15 kg
Remedy
Check socket, cable and plug.
Damaged cable: Have repaired by Customer Service.
It is prohibited to patch the cable with insulating tape.
Damaged switches have to be replaced by a Cus-
tomer Service workshop
See section "chain brake" and "Releasing the chain
brake"
Change the carbon brush, ask a Customer Service
workshop
Check the chain brake, release if necessary.
Sharpen the chain
Chain wrongly fi tted
Check the chain tension
Check the chain tension
Check oil level
Check Chain lubrication
FZP 2025-E
Advertisement
Table of Contents
