Edge Mask; Geometric Correction - Barco G62 User Manual

9.5 Edge Mask

About edge mask
The edge blending function allows you to hide one or multiple edges of the projected image.
You can use this function to remove the video encoding noise on the edges of the video images.

9.6 Geometric Correction

About geometry correction
Configure the geometry settings to reshape the image for different projection surface.
Warp control
Configure warp settings.
• Basic:
Configure basic settings, such as keystone, pincushion, and 4-corner.
• Advanced:
Configure advanced settings, such as grid points, warp inner, warp sharpness, and more.
Basic Warp
Configure basic warp settings.
• Keystone:
The keystone functionality is used to adjust the images in asymmetric rectangle shape.
- Horizontal:
Adjust the left and right side of the projected image to make it an even rectangle, used for images with
unequal left and right sides.
Image 9–1
- Vertical:
Adjust the top and bottom side of the projected image to make it an even rectangle, used for images
with unequal top and bottom sides.
Image 9–2
• Pincushion:
Pincushion function is used to adjust the image with barrel or pincushion distortion.
- Horizontal:
Correct the projected image with horizontal barrel or pincushion distortion.
User controls – Installation menu
R5914653 /10 G62 59