Backup Input - Barco G62 User Manual

User controls – Source menu
PIP/BPB
Matrix
DVI-D
3G-SDI
HDBaseT
Sub brightness
Adjust the luminous brightness of the sub image to adapt to different ambient light.
Sub contrast
Adjust the contrast ratio of the sub image.
Sub color space
Select a color space for the sub image.

7.4 Backup input

About backup input
The "Backup Input" function allows the user to set up two input sources with the same timing specification.
Upon connection loss of one input source, the projector automatically switches to the backup source.
This function can be useful for the installations requiring uninterrupted displaying of the content source, such
as live show, exhibition, and critical control room.
Auto switch
Check the box to enable automatic switching to the backup input source when the active source fails.
Current signal
Displays the currently active signal.
First input
Select a signal as the first input source.
Once the selected source is activated, the OSD menu lists out the signals Resolution, Horz Refresh rate
(horizontal refresh rate), and Color Space.
Second input
Select a signal as the second input source.
Once the selected source is activated, the OSD menu lists out the signal's Resolution, Horz Refresh rate
(horizontal refresh rate), and Color Space.
Backup input status
Displays the status of the backup input function.
The backup input status will show as active, when meeting the following conditions:
• Auto switch is on.
• The two sources have the same timing specification.
• The two sources are active.
• Projector is displaying one of the two sources.
44 R5914653 /10 G62
HDMI-1 HDMI-2
V V
V V
V V
DVI-D 3G-SDI
— V
V —
V V
HDBaseT
V
V
—