Paradyne 7974 User Manual page 166

Index
SYNC Ports Options, A-8
SYNC Pt Down, status message, 7-4
system, LEDs, 7-18
System and Test Status screen, 7-2
System Options, A-13
T
T1 network interface, pin assignments, C-6
Telco-initiated
line loopback, 8-18
loopback, enable/disable, A-14
payload loopback, 8-19
remote line loopback, 8-19
Telnet session
access, 6-1
access level, A-20
enable/disable, A-20
inactivity timeout, A-20
login required, A-20
options, A-19
terminal
communication parameters, 3-4
connecting, 3-4
settings required, 3-4
terminal port, direct connection, 2-1
test
aborting, 8-17
Data Channel Loopback, 8-11
Data Terminal Loopback, 8-10
DTE Loopback
DSX-1, 8-8
G.703, 8-15
LED, 7-18
Line Loopback, 8-4
menu, 8-1, 8-13
Network Repeater Loopback (DSX-1), 8-7
Network Repeater Loopback (G.703), 8-14
Network-Initiated DCLB, A-10
Port (DTE) Initiated Loopbacks, A-10
Remote Send Line Loopback, 8-5
status messages, 7-6
switch setting for telco loopback, 4-5
switch setting for telco remote loopback, 4-5
Telco-initiated, 8-18
terminating, 8-17
Test Duration, A-13
Test Timeout, A-13
IN-6
Time Slot16, configuration option, A-12
time slots, relative to payload rate, A-5
timeout
Com port session inactivity, A-18
for tests, A-13
Telnet session inactivity, A-20
timing
DSX-1 primary clock source, A-7
G.703 primary clock source, A-12
synchronous data port, A-9
Transmit Attenuation, A-4
transmit clock source, A-9
traps
SNMP, B-1, B-2
support of, 1-7
troubleshooting, 7-19
DSL performance statistics, 7-11
DSX-1 performance statistics, 7-13
error statistics, 7-9
G.703 performance statistics, 7-15
U
UNIX, TFTP server on, 3-12
user interface, 3-4
async terminal, 2-1
how to access, 2-1
resetting/restoring access, 6-6
V
V.35 interface, C-13
V.54 Loop 3. See data terminal loopback (DTLB)
virtual function keys, 2-7
W
warmStart, B-2
weight of unit, D-1
August 2000 7900-A2-GB21-00