Advertisement
Quick Links
Download this manual
See also:
User Manual
®
Hotwire
TDM SDSL Termination Unit
Ferrite Choke
Installation Instructions
Document Number 7900-A2-GK41-00
December 2000
A ferrite choke is included with this Hotwire
needs to be installed on the DSL network cable.
Procedure
To install the ferrite choke on the DSL network cable:
Hotwire is a registered trademark of Paradyne Corporation.
Copyright © 2000 Paradyne Corporation. Printed in U.S.A.
7900-A2-GK41-00
CAUTION
When ferrite chokes are supplied, they must be installed following
these instructions to be in compliance with FCC Part 15, VCCI, and
CISPR22 rules.
1. Open the ferrite choke and place it around the cable, as close to the
termination unit as possible.
2. Close the two halves around the cable and snap the latch shut.
Ferrite Choke
Connector
*7900-A2-GK41-00*
December 2000
®
TDM SDSL Termination Unit, which
Plastic
Latch
00-16917
1
Advertisement
