Paradyne 7974 User Manual page 164

Index
Login ID, 6-1
access levels, 6-2
adding, 6-3
deleting, 6-5
invalid, 7-7
Login Required, enabling, A-17
loopback, effect on LEDs, 7-18
LOS (Loss Of Signal), status message, 7-3
LOS alarm action, A-10
LTU
NTU combinations supported, 1-3
switch setting for
Models 7944, 7974, 7984, 4-5
Models 7945, 7975, 7985, 4-8
Models 7976 and 7986, 4-10
M
main menu, 2-2, A-1
Management and Communication Options, A-19
management port
access, 6-1
settings, 2-1
manual configuration, internal switches, 4-2
Margin Threshold, A-2
Max DSL AutoRate, A-3
maximum payload rate, A-5
Memory Fail, status, 7-5
menu tree, 2-4
messages
health and status, 7-3
line 24, 7-7
self-test results, 7-5
test status, 7-6
MIB
general support, 1-6
list of supported MIBs, 1-6
Mismatch Rate, Health and Status message, 7-4
monitoring, 7-1
IN-4
N
navigating the screens, 2-6
Net Margin Threshold, status message, 7-4
network
configuration examples, 1-7
destination, A-22
DSL interface pin assignments, C-14
interface options, A-2
line loopback, 8-4
Remote Send Line Loopback, 8-5
T1/E1 network interface pin assignments, C-6
tests, 8-3
Network Error Statistics screen, 7-9
Network Interface Options, Transmit Attenuation, A-4
Network Performance Statistics screen, 7-11
Network-Initiated DCLB, A-10
NMS
SNMP access, 6-7
SNMP connectivity, 5-1
SNMP NMS Security Options, A-26
no test active status message, 7-6
Node IP Address, A-22
Node Subnet Mask, A-22
NTU
LTU combinations supported, 1-3
switch setting for
Models 7944, 7974, 7984, 4-5
Models 7945, 7975, 7985, 4-8
Models 7976 and 7986, 4-10
NTU/LTU Mismatch, Health and Status message, 7-4
Number of Trap Managers, A-29
O
OK, LED, 7-18
OOF (Out Of Frame), status message, 7-4
options, configuration tables, A-1
overview
features of unit, 1-2
user's guide, vii
August 2000 7900-A2-GB21-00