Paradyne 7974 User Manual page 134

M/sdsl standalone termination units
Table of Contents

Advertisement

Standards Compliance for SNMP Traps
warmStart
authenticationFailure
B-2
In general, all traps have at a minimum a variable binding of ifIndex. For a
standalone NTU connected to a DSLAM running IP Conservative software, all
traps have at a minimum a variable binding of the Super Overloaded ifIndex
(SOI). The formula for the SOI is:
((LTU Slot Number) * 1,000,000)
+ ((LTU DSL Port Number) * 1,000)
+ the NTU's ifIndex.
SNMP Trap
Description
warmStart
The unit has reinitialized
itself.
The trap is sent after the unit
resets and stabilizes.
There are no variable
bindings.
SNMP Trap
Description
authenticationFailure
Failed attempts to access
the unit.
Variable bindings:
H
August 2000
devAuthentication
FailureIPAddress
(Health & Status MIB)
Returns zero if the IP
address is unknown or the
failure came from the
terminal port.
Possible Cause
H
Reset command.
H
Power disruption.
Possible Cause
Three unsuccessful attempts
were made to enter a correct
login/password combination.
7900-A2-GB21-00

Advertisement

Table of Contents
loading

This manual is also suitable for:

79757976Hotwire 7974-a2Hotwire 7975-a2Hotwire 7976-a2

Table of Contents