Paradyne 7974 User Manual page 140

Standards Compliance for SNMP Traps
B-8
enterpriseTestStart/Stop variable
Interface
bindings
H
EIA-530-A ifIndex (RFC 1573)
H
ifAdminStatus (RFC 1573)
H
ifOperStatus (RFC 1573)
H
ifType (RFC 1573)
H
ifTestType (RFC 1573)
The following objects control tests
in SNMP-managed devices:
– noTest(0) – Stops the test in
progress.
– testLoopDCLB(3) – Initiates a
Data Channel Loopback.
– testLoopDTLB(3) – Initiates a
DTE Loopback.
– testLoopRLB(5) – Initiates a
Remote Loopback.
– testSendDCLBUp(9) – Initiates a
Data Channel Loopback Up
message.
– testSendDCLBDown(10) –
Initiates a Data Channel
Loopback Down message.
August 2000
Possible Cause
H
enterpriseTest Start – Any
one of the following tests is
active on the interface:
– Data Channel Loopback
– DTE Loopback
– Repeater Loopback
H
enterpriseTest Stop – No tests
currently running on the
interface.
7900-A2-GB21-00