Table of Contents
Advertisement
Chapter 5 Additional Settings
Items
Authentication
Email Settings
Content Options
Test Message
Specifying TeraStation Reports
A notification email can be sent using TeraStation reports.
1
Click the Start button and click Email Notification.
2
Click Content Options.
Descriptions
SMTP Server Address: Enter your email SMTP server's address and
port number. Port number 25 is configured by default.
Note: If you choose "None" or "POP before SMTP" for the user
authorization, the port number is locked to "25".
User Authentication Method: Select the user authorization type
from "None", "POP before SMTP", "LOGIN (SMTP-AUTH/LOGIN)", and
"CRAM-MD5 (SMTP-AUTH/CRAM-MD5)". If "POP before SMTP" is
selected, enter the POP server address and port number. Unless the
port is specified, the standard port number (110) is used.
Username and Password: Enter the username and password of your
email server.
SSL/TLS: If "LOGIN (SMTP-AUTH/LOGIN)" or "CRAM-MD5 (SMTP-AUTH/
CRAM-MD5)" is selected, select whether to use SSL/TLS or STARTTLS.
Sender Address: Enter the sender's email address for notification
emails.
Title: Enter the subject of the notification email.
Click Content Options to select the event that will trigger the
notification emails to be sent.
Configures the events that will trigger emails to be sent. Refer to
the
"Specifying TeraStation Reports"
Logs"
sections below for more detailed information.
Sends a test email to the email address which is configured.
92
and
"Specifying Windows Event
Advertisement
Table of Contents
