Table of Contents
Advertisement
Chapter 5 Additional Settings
7
For any adapters, select "Wake on Magic Packet" under "Property" and change "Value" to "Enabled".
Notes:
• To use Wake-on-LAN, you'll need Wake-on-LAN software that sends magic packets. The TeraStation does not
include Wake-on-LAN software.
• If the TeraStation is powered off by Wake-on-LAN using a 10GbE port (LAN port 3), the link speed will be fixed to
100 Mbps. To use with a 10GbE port, all network devices must be compatible with 100 Mbps speed.
102
Advertisement
Table of Contents
