Ametek SurgeX Vertical+ Series User Manual page 24

4.4.4.2 Autoping
Item
IP
Fail Count
Success Count
© 2023 AMETEK SurgeX | Technical Support 800-645-9721 | surgex.com
The Autoping trigger uses a ping command on a periodic basis defined in the device settings to test if a
specific IP address will respond. This trigger type is useful if there is a problematic piece of equipment
that becomes unresponsive, or if internet connectivity is inconsistent.
Description
IP address to be pinged at the period set on the device configuration
page.
Number of consecutive failed ping responses needed to trigger the
Auto Ping trigger.
Number of consecutive successful ping responses needed to clear the
Auto Ping trigger.
User Manual
24