Setup - Ametek SurgeX Vertical+ Series User Manual

4.4 Setup

Complete setup and configuration of V Series is provided via 6 Setup web pages. Each setup page is described in the
following sections. Each setup page has a save button at the bottom of the page which must be pressed to keep the
configuration changes. A green success message will temporarily appear in the top right of the page when the settings
are saved properly.
Setup Page
Device
Device Configuration
Outlet Configuration
Outlet Group Configuration
Date/ Time Settings
Network
Network Advanced
SNMP
802.IX Settings
LDAP Client Settings
Users
Triggers
Threshold with Samples
Auto Ping
Schedule
Sequences
© 2023 AMETEK SurgeX | Technical Support 800-645-9721 | surgex.com
Setup
Configure basic device parameters
Configure settings for visual feedback and power up procedure
Configure controllable outlet settings·
Create, Edit. or delete outlet groups.
Configure NTP server or set manual time
Configure network settings, including the network adapter and time keeping
Configure advanced monitoring and security settings
Configure SNMP connection and communication settings
Configure authentication settings and/or view connection logs.
Configure LDAP authenticator, options, and test connection
Configure and modify user accounts.
Create and modify Triggers
Configure triggers based on measurements
Configure triggers based on pinging IP addresses
Configure triggers based on time
Create and modify custom Sequences
Description
User Manual
13