Table of Contents
Advertisement
After a sequence has been saved, it will be available at the Sequences page, and when creating or editing a
trigger when run sequence is selected as an action.
*Time delay is specified from the previous sequence item, not from the initial starting point. For example,
creating a sequence with "Step 1, 1 second, Outlet 1, On" and "Step 2, 1 second, Outlet
2, On" will turn on Outlet 1 after 1 second, and Outlet 2 on 1 second after Outlet 1 has turned on. This
sequence will not turn on both Outlets 1 and 2 at the same time.
Sequence Actions:
4.5
Utilities
V Series contains several utilities to ease the configuration and deployment that may be performed on a per unit
basis through several web pages.
4.5.1
File Upload
V Series allows for a variety of files to be uploaded. This is also the method for upgrading the firmware.
Current firmware versions can be obtained from the SurgeX website. V Series will not automatically contact
SurgeX servers for new firmware. Other files that can be uploaded include a variety of certificates and
configurations. By default, V Series ships with a self-signed HTTPS certificate if HTTPS is enabled. A
different certificate can be uploaded for use by the HTTPS server by selecting "HTTPS SSL Certificate"
under the File type drop down.
© 2023 AMETEK SurgeX | Technical Support 800-645-9721 | surgex.com
None (useful for additional time delays)
•
State Change
•
o On, Off, or Reboot.
User Manual
27
Advertisement
Table of Contents
