Table of Contents
Advertisement
4.5.2
Backup/Restore
The current configuration may be saved to a
file and downloaded for archival. Previously
stored configurations may be applied to other
units to easily mass configure a larger
deployment. IP Settings will not be saved in
the Backup Configuration.
4.5.3
Factory Reset
Factory default settings may be applied
through the web interface.
• Option to keep or reset network IP
settings. - Web Server settings will be reset.
A custom port number will be reset to 80,
and SSL will be disabled by default.
4.5.4
Soft Reboot
Adds the ability to reboot the V Series
processor. A soft reboot will not change the
outlet state or disconnect power from
connected equipment. This request will add
a message in the event log "Rebooting
Adapter Due to User Request".
© 2023 AMETEK SurgeX | Technical Support 800-645-9721 | surgex.com
User Manual
28
Advertisement
Table of Contents
