Installation And Components; Ac Power: Output Power; Ac Power: Input Power; Ethernet - Ametek SurgeX Vertical+ Series User Manual

Switched ip controllable vertical pdu
Table of Contents

Advertisement

2.

Installation and Components

V Series is designed to be installed vertically in the back of an equipment rack. The supplied nuts,
bolts and washers must be used to mount the V Series to the rack through the mounting holes (A)
following the appropriate local regulations and requirements.

2.1 AC Power: Output Power

Plug the equipment cord (B) into the suitable receptacles as needed. Please review Introduction,
Physical Interfaces, column Outputs, for the suitable plugs for each model's receptacles.

2.2 AC Power: Input Power

Connect power to the V Series using an appropriately rated 3 wire grounding type power cord
provided with the equipment (C). Do not plug the unit into a relocatable power tap. Check the
outlet for correct polarity and presence of a ground conductor before plugging the unit in.

2.3 Ethernet

The RJ45 connector for Ethernet (D) is situated on the front panel and is to be used for setup,
debugging, and network connectivity. The default IP Address is DHCP assigned. To find the IP
address of the device, please use the discovery tool at ametekesp.com. The mDNS protocol is
supported for dynamic device discovery.
The default username is admin, and the default password is Adm1nXXXXXX where XXXXXX
are the last six characters of the MAC address.

2.4 USB-Micro AB

The USB-MICRO AB connector (E) is for OOB diagnostics and
troubleshooting IP connectivity issues. To use, please use the
discovery tool at ametekesp.com or manually enter the static.
IP address https://169.254.10.100 into a supported web browser.
The web server will always be accessible at
https://169.254.10.100 through this USB port.
The web server on this interface cannot be
changed and will always be unsecured HTTP at port 80.

2.5 LED Indicators

The receptacles have individual power indicator LEDs (F).
These are paralleled in the control interface. In addition,
the unit has an LED indicating power (G).
© 2023 AMETEK SurgeX | Technical Support 800-645-9721 | surgex.com
User Manual
A
F
H
E
D
I
J
G
A
C
A
B
A
7

Advertisement

Table of Contents
loading

Table of Contents