Network Setup - Ametek SurgeX Vertical+ Series User Manual

4.4.2 Network Setup

The Network Setup page allows for the specification of network settings, including the network interface
and NTP time server.
Item
Setup
Address
Subnet Mask
Gateway
DNS 1
DNS 2
Hostname
SSL
HTTP Enabled
HTTP Port
© 2023 AMETEK SurgeX | Technical Support 800-645-9721 | surgex.com
Network Configuration
Description
Specifies if the device will have a static IP Address or will dynamically be assigned
network settings through DHCP.
Current IP Address of the network interface on the RJ45 Ethernet port
Current Subnet Mask of the network interface on the RJ45 Ethernet port.
Current Gateway of the network interface on the RJ45 Ethernet port
Current DNS1 of the network interface on the RJ45 Ethernet port.
Current DNS2 of the network interface on the RJ45 Ethernet port.
A configurable unique name to be used to access the device instead of an IP
Address.
Specifies whether the web server will be SSL encrypted (HTTPS) or not (HTTP).
The default certificate is self-signed and will require the user continue through a
safety notification if a custom signed certificate is not uploaded to the device.
Specifies if the web server is enabled or disabled. NOTE: If disabling the web
server, the web interface end REST API will be disabled, only limited functionality
over SNMP will remain it enabled.
Port number to use for the web server.
User Manual
18