Network Setup - Ametek SurgeX Squid SX-DC-8-12-120 User Manual

5.4.2 Network Setup

The Network Setup page allows for the specification of network settings, including the network interface and t
time server.
Network Configuration
Item
IP Setup
IP Address
Subnet Mask
Gateway
DNS 1
DNS 2
Hostname
SSL
HTTP Enabled
HTTP Port
© 2021 AMETEK Power Quality Solutions | Technical Support 800-645-9721 | surgex.com
Description
Specifies if the device will have a static IP Address, or will dynamically be assigned network
settings through DHCP.
Current IP Address of the network interface on the RJ45 Ethernet port.
Current Subnet Mask of the network interface on the RJ45 Ethernet port.
Current Gateway of the network interface on the RJ45 Ethernet port.
Current DNS1 of the network interface on the RJ45 Ethernet port.
Current DNS2 of the network interface on the RJ45 Ethernet port.
A configurable unique name to be used to access the device instead of an IP Address.
Specifies whether the web server will be SSL encrypted (HTTPS) or not (HTTP). The default
certificate is self-signed, and will require the user continue through a safety notification if a custom
signed certificate is not uploaded to the device.
Specifies if the web server is enabled or disabled. NOTE: If disabling the web server, the web
interface and REST API will be disabled, only limited functionality over SNMP will remain if
enabled.
Port number to use for the web server.
User Manual
14