Setup - Ametek SurgeX Squid SX-DC-8-12-120 User Manual

5.4

Setup

Complete setup and configuration of Squid is provided via 6 Setup web pages. Each setup page is
described in the following sections. Each setup page has a save button at the bottom of the page, be
sure to press the save button at the bottom of the page to keep the configuration changes. A green
success message will temporarily appear in the top right of the page when then settings are saved
properly.
Setup
Setup Page
Device
Device Configuration
Outlet Configuration
Outlet Group Configuration
Date/Time Settings
Network
Network Advanced
SNMP
802.1X Settings
LDAP Client Settings
Users
Triggers
Threshold with Samples
AutoPing
Schedule
Sequences
© 2021 AMETEK Power Quality Solutions | Technical Support 800-645-9721 | surgex.com
Description
Configure basic device parameters
Configure settings for visual feedback and power up procedure
Configure controllable outlet settings
Create, edit, or delete outlet groups
Configure NTP server, or set manual time
Configure network settings, including the network adapter and time keeping
Configure advanced monitoring and security settings
Configure SNMP connection and communication settings
Configure authentication settings and/or view connection logs.
Configure LDAP authentication options, and test connection
Configure and modify user accounts
Create and modify Triggers
Configure triggers based on measurements
Configure triggers based on pinging IP addresses
Configure triggers based on time
Create and modify custom Sequences
User Manual
9