Point-To-Point Multiplexing - Paradyne 3610 Application Manual

COMSPHERE 3600 Series Data Service Units

Point-to-Point Multiplexing

The 3600 Series DSU operating in TDM mode can be
used for point-to-point circuits at speeds of up to 64 kbps.
Figure 4-6 shows a typical TDM application. In
point-to-point multiplexing, the DTEs at Port 1
4-10
communicate with one another, the DTEs at Port 2
communicate with one another, and so on. The TDM
point-to-point application provides the same functionality
as six point-to-point circuits. The DDS circuit can be
provided by a service provider or a metallic 4-wire LADS
facility.
Figure 4-6. Point-to-Point Multiplexing
July 1999 3610-A2-GB41-70