Paradyne 3610 Application Manual page 229

Set configuration options for automatic partial backup
using the DSU-DBM-TDM as follows (Configuration
Worksheet for TDM Mode):
MUX – Setup
MUX Funct: TDM
Share DevA: Disab
Share DevB: Disab
P1/2 FEP Sh: Enab
P3/4 FEP Sh: Enab
P5/6 FEP Sh: Disab
Prt1 and Prt3 (Prt5 N/A)
Async Sync: Disab
TxCarrSel: Const
RxCarrSel: Cntrl
PCC Buffer: Enab for control; Disab for tributary
Elast Stor: Enab
RTS/CTS Del: 0
Prt2 and Prt4 (Prt6 N/A)
Async Sync: Disab
RTS Cntrl: DTE
TxCarrSel: Const
RxCarrSel: Const
RTS/CTS Del: 0
DTR Alarm: Disab
AntiStream: Disab
PrtSp – DSU
Prt1: 7.2
Prt2: 7.2
Prt3: 4.8
Prt4: 4.8
Prt5 and Prt6: Disab
3610-A2-GB41-70
Diag – DSU
Diag Type: NonD
2nd Ch(bps): 40
Disr Type: 3600e
Diag – Gen
Position: Cntrl LinkConfig: Pt-Pt
DBM
Rate(Kbps): N/A for control; 14.4 for tributary
TxClkSource: Ext for control; RXC for tributary
CarrLossDisc: N/A for control; Yes for tributary
Auto Retrain: N/A for control; Yes for tributary
Single Rate: N/A for control; Yes for tributary
AutoAnswer: Enab
Call Setup: Pswrd
RxPwd: enter received password
TxPwd: enter transmit password
Primary Core: Yes for control; No for tributary
DTRCallCon: N/A for control; Disab for tributary
Gen
DTE Port: EIA232
RTS Cntrl: FrcOn
Bkup
Auto Bckup: Disab
AutoRestor: Disab
July 1999
Configuration Scenarios
D-33