Paradyne 3610 Application Manual page 175

Date:________________________________________________
Device:______________________________________________
Serial No.:____________________________________________
MUX Setup Options
MUX Funct: *
TDM, MCMP , CBrdg, EBrdg, None
(CBrdg or EBrdg)
Brdge Rate =DSU, 56, 19.2, 14.4, 12.0, 9.6, 4.8, 2.4
Brdg Timing Int, Auto, Prt1, Prt2, Prt3, Prt4, Prt5, Prt6
Share DevA: Enab
Lowest Port # DCE, 2, 3, 4, 5
#Ports in Gp: 2, 3, 4, 5, 6
Port Cntrl: Host, DSD
Share DevB: Disab
*MCMP option only
Prt4 Options
RTS Cntrl FrcOn, DTE
TxCarrSel Const, Cntrl
RxCarrSel Const, Cntrl, Mark
PCC Buffer Enab, Disab
Elast Stor Enab, Disab
RTS/CTS Del (Chang) 0–1040 ms
DTR Alarm Enab, Disab
Antistream (Chang) Disab, 1–100 sec
DSR FrcOn Enab, Disab
DSR on Tst Enab, Disab
Extend Chan Yes, No
Upstrm Port Prt1, Prt2, Prt3, Prt4, Prt5, Prt6
DTE Port EIA232, V.35
Configuration Worksheet for Bridge Mode (1 of 2)
Location:_____________________________________________
Local Address:_________________________________________
Tributary Network Address:_______________________________
Value Prt2 Options
RTS Cntrl
TxCarrSel
RxCarrSel
PCC Buffer
Elast Stor
RTS/CTS Del
DTR Alarm
Antistream
DSR FrcOn
DSR on Tst
Extend Chan
Upstrm Port
DTE Port
Value Prt5 Options
RTS Cntrl
TxCarrSel
RxCarrSel
PCC Buffer
Elast Stor
(8 ms increments) RTS/CTS Del
DTR Alarm
(async terminal = 0–100) Antistream
DSR FrcOn
DSR on Tst
Extend Chan
Upstrm Port
DTE Port
Value
FrcOn, DTE
Const, Cntrl
Const, Cntrl, Mark
Enab, Disab
Enab, Disab
(Chang) 0–1040 ms (8 ms increments)
Enab, Disab
(Chang) Disab, 1–100 sec (async terminal = 0–100)
Enab, Disab
Enab, Disab
Yes, No
Prt1, Prt2, Prt3, Prt4, Prt5, Prt6
EIA232, V.35
Value
FrcOn, DTE
Const, Cntrl
Const, Cntrl, Mark
Enab, Disab
Enab, Disab
(Chang) 0–1040 ms (8 ms increments)
Enab, Disab
(Chang) Disab, 1–100 sec (async terminal = 0–100)
Enab, Disab
Enab, Disab
Yes, No
Prt1, Prt2, Prt3, Prt4, Prt5, Prt6
EIA232, V.35
r
Local Phone No.: ( )______________________________
r
DBM Installed
r
SNA Diagnostic Interface (LPDA-2) Installed
Prt3 Options
RTS Cntrl FrcOn, DTE
TxCarrSel Const, Cntrl
RxCarrSel Const, Cntrl, Mark
PCC Buffer Enab, Disab
Elast Stor Enab, Disab
RTS/CTS Del (Chang) 0–1040 ms
DTR Alarm Enab, Disab
Antistream (Chang) Disab, 1–100 sec
DSR FrcOn Enab, Disab
DSR on Tst Enab, Disab
Extend Chan Yes, No
Upstrm Port Prt1, Prt2, Prt3, Prt4, Prt5, Prt6
DTE Port EIA232, V.35
Prt6 Options
RTS Cntrl FrcOn, DTE
TxCarrSel Const, Cntrl
RxCarrSel Const, Cntrl, Mark
PCC Buffer Enab, Disab
Elast Stor Enab, Disab
RTS/CTS Del (Chang) 0–1040 ms
DTR Alarm Enab, Disab
Antistream (Chang) Disab, 1–100 sec
DSR FrcOn Enab, Disab
DSR on Tst Enab, Disab
Extend Chan Yes, No
Upstrm Port Prt1, Prt2, Prt3, Prt4, Prt5, Prt6
DTE Port EIA232, V.35
Value
(8 ms increments)
(async terminal = 0–100)
Value
(8 ms increments)
(async terminal = 0–100)