Overview; Diagnostic Control Panels - Paradyne 3610 Application Manual

COMSPHERE 3600 Series Data Service Units

Overview

This chapter identifies and discusses function and
selection differences on the DSU when the TDM or
MCMP optional feature is installed. It also discusses
operation of DBM-Vs, DBM-Ss, and DBM-Ds, which are
used in digital bridge applications.
As with the COMSPHERE 3600 Series Data Service
Units, Models 3610 and 3611, Operator's Guide, this
chapter follows the structure of the Menu Tree
(Appendix A), discussing changes as they would appear
as you operate the DSU from its diagnostic control panel
(DCP or SDCP).
NOTE
Throughout this chapter, shaded
keys indicate the key you should
press to display the next screen
in the example provided or the
next screen in the procedure.
Refer to the COMSPHERE 3600 Series Data Service
Units, Models 3610 and 3611, Operator's Guide to
understand how the DSU operates without the TDM or
MCMP and for more control panel, display, key, and
menu function information.
5-2

Diagnostic Control Panels

Diagnostic control panel (DCP for the Model 3610
DSU), shared diagnostic control panel (SDCP for the
Model 3611 DSU), or async terminal operation does not
vary with the addition of DSU options (DBM, DBM-V,
DBM-S, or DBM-D; TDM; MCMP; or SNA Diagnostic
Interface). However, menu or selection displays may vary
based upon the option that is installed.
Except where a distinction is
made, the term DCP refers to
either type of diagnostic control
panels, DCP or SDCP.
July 1999
NOTE
3610-A2-GB41-70