Zepro Z 1500 Technical Manual page 24

Control cards
2.2.5 Control device input
The control devices are connected to the control device input section and powered by the control device power
section of the control card. They are used to input user comands into the control card so that they can be in-
terpreted and executed. The control devices can be grouped into two groups depending on their functionality:
primary and secondary devices. Primary devices can operate all functions of the tail lift including those that
require two-handed operation for safety reasons. Secondary devices do not offer the possibility of two-handed
operation and are therefore unable to operate certain functions. The most common primary control devices for
the Z 1500/2000 are shown below.
24
Fig 15. CD 19
Fig 16. CD 1
Fig 17. CD 4
www.zepro.com