Zepro Z 1500 Technical Manual page 15

Control cards
The ZePRO1 control card has six control device inputs Ctrl 1 through Ctrl 6.
• Ctrl 1 - Input for a primary control device. Can control all tail lift functions apart from slide in / slide out.
• Ctrl 2 - Input for a primary control device. Same functionality as Ctrl 1.
• Ctrl 3 - Input for a secondary control device such as radio control device with externally mounted receiver.
• Ctrl 4 - Input for a secondary control device such as in-box mounted device with a spiral cable.
• Ctrl 5 - Input used for the slide out / slide in functionality of sliders. Not used on the Z 1500/2000.
• Ctrl 6 - Input used for the receiver of the radio control device. Same functionality as Ctrl 3.
The most common secondary control devices for the Z 1500/2000 are shown below.
www.zepro.com
Fig 7. CD 9
Fig 8. CD 10
15