Table of Contents
Advertisement
Important
The rate of accidents deriving from the use
of appliances depends on many factors
which cannot always be foreseen and con-
trolled. Some accidents may be caused by
unpredictable environmental factors, while
others are due above all to the behaviour of
users. As well as receiving authorisation
and appropriate instruction, if necessary,
the first time they use the appliance, users
must carry out a few simulated practice op-
erations in order to get to know the controls
The appliance is fitted with the controls for use of
its main functions.
A)Burner control knob: for lighting, turning off
and regulating the relative burner and pilot
light.
IT
AUS
SES
C
Lighting
1 - Turn on the gas supply tap.
2 - Press the knob and turn it anti-clockwise (pos. a)
while at the same time pressing the piezoelectric
ignition knob (A) repeatedly to light the pilot light.
Keep the knob pressed for about 15 sec. to prime
USE AND OPERATION
RECOMMENDATIONS FOR USE
DESCRIPTION OF CONTROLS
Pilot light marker
Off marker
B
SWITCHING THE BURNER ON AND OFF
and the main functions. Use only as intend-
ed by the constructor and never tamper
with any device to obtain performance lev-
els outside the rated specifications. Before
use, check that the safety devices are prop-
erly installed and in good working order. As
well as taking care to meet these require-
ments, users must also implement all safe-
ty regulations and read the description of
the controls and the start-up procedure
carefully.
B)Cold water tap: for regulating the water flow.
C)Hot water tap: for regulating the water flow.
D)Piezoelectric ignition knob: for lighting the pilot light.
Piezoelectric ignition
Full power marker
A
Minimum power
marker
the thermocouple.
- 6 -
marker
D
C
B
A
D
IDM-39603303500.tif
4
Advertisement
Table of Contents
