Philips HomeRun Aqua XU3000/01 Manual page 22

English
24
Cleaning the main wheels and the front caster wheel
2
3
1
Cleaning the sensors, contact points and IR signal window
3 Use a brush with soft bristles (e.g. a toothbrush) to remove dust or fluff from
the side brush and the robot.
Tip: You can use the brush end of the cleaning tool to remove dust or fluff
from the side brush and the robot.
4 Attach the side brush by clicking it into the correct position on the bottom of
the robot.
1 Put the robot upside down on a surface that is flat and stable.
2 Use a brush with soft bristles (e.g. a toothbrush) to remove dust or fluff from
the front caster wheel and main wheels.
You can use the brush end of the cleaning tool to remove dust or fluff
from the wheels.
To maintain good cleaning performance, you have to clean sensor, contact
points and IR signal window from time to time.
1 Unplug the station from the wall socket
2 Use a soft non-abrasive dry cloth. If necessary, lightly moisten the cloth.
3 Clean the components.
Note: Do not use cleaning detergents.