Philips HomeRun Aqua XU3000/01 Manual page 20

English
22
1
2
1
2
Cleaning the main brush
2
1
4 Rinse the water tank with tap water
5 Dry the outside of the water tank with a cloth.
Note: Do not use cleaning detergents.
IMPORTANT:Do not wash water tank in the dishwasher.
6 Keep the sealing cap of the water tank open and allow the inside of the
water tank to air dry.
Note: Do not use other ways to dry the water tank.
7 Put the dust bin back to the water tank.
8 Fill the water tank from the water inlet. Insert the water tank in the correct
location.
Note: Make sure that the outside of the water tank is dry.
Note: Do not use cleaning detergents.
1 Put the robot upside down on a surface that is flat and stable.
2 Push the release buttons of the brush cover at the same time.
3 Lift and remove the brush cover.
4 Pull the main brush out.
5 Use the cleaning tool to cut through the hairs.