Boot - DFI AL173 User Manual

Boot

This section configures boot options.
InsydeH2O Setup Utility
Main Advanced Security Boot
Setup Prompt Timeout [0]
Numlock <On>
Quiet Boot <Disabled>
Network Stack <Disabled>
PXE Boot capability <Disabled>
USB Boot <Enabled>
F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→  Select Item Enter
Setup Prompt Timeout
Select the number of seconds that the firmware will wait before booting the original
default boot selection.
Numlock
Select the power-on state for numlock: On or Off.
Quiet Boot
Enable or disable booting in text mode.
Network Stack
Enable or disable network stack. It supports the operation of these functions or
software: Windows 8 BitLocker Network Unlock, UEFI IPv4/IPv6 PXE and legacy PXE
Option ROM.
PXE Boot capability
Disable or enable PXE (Preboot eXecution Environment) boot to LAN.
USB Boot
Enable or disable the booting to USB boot devices.
Chapter 3 BIOS Setup
Rev. 5.0
Exit
The number of seconds
that the fi rmware will wait
before booting the original
default boot selection.
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

Chapter 3
Note:
AL171/AL173 only support UEFI boot, no Legacy
40
boot.
www.dfi .com