▲ Security
Administrator Password
Set the administrator password. To clear the password, input nothing and press enter when a
new password is asked. Administrator Password will be required when entering the BIOS.
User's Manual | CMS631-Q470E/H420E
▲ Security
Secure Boot
Secure Boot
Secure Boot feature is Active if secure Boot is Enabled, Platform Key (PK) is enrolled and the
system is in user mode. The mode change requires platform reset.
Secure Boot Mode
Select the secure boot mode — Standard or Custom. When set to Custom, the following fields
will be configurable for the user to manually modify the key database.
Restore Factory Keys
Force system to User Mode. Load OEM-defined factory defaults of keys and databases onto the
Secure Boot. Press Enter and a prompt will show up for you to confirm.
Reset To Setup Mode
Clear the database from the NVRAM, including all the keys and signatures installed in the Key
Management menu. Press Enter and a prompt will show up for you to confirm.
Chapter 3
BIOS SETTINGS
42
42