1862 VoIP IAD User's Guide
5.4.2 Static route configuration
The Routes Configuration field allows you to add, modify, and delete a static route. Type the
Destination Network ID, subnet mask and Next hop IP, and click on on a button below to
perform the requested function. Up to 20 static route entries can be added.
Add:
To add a static route complete the following steps:
STEP 1: Click on Routing Setup on the menu bar.
STEP 2: Enter parameters for Destination Network ID, Subnet Mask and Next Hop IP.
STEP 3: Click on the ADD button.
Modify:
To modify a static route complete the following steps:
STEP 1: Select the entry you wish to modify from the List of Static Routes.
STEP 2: Change the parameters.
STEP 3: Click on the Modify button.
Delete:
To delete a static route complete the following steps:
STEP 1: Select the entry you wish to delete from the List of Static Routes
STEP 2: Click on the Delete button.
38