Delete Encapsulation - Paradyne 1862 User Manual

1862 VoIP IAD User's Guide
6.2.2

Delete Encapsulation

To delete encapsulation first select a VCC entry and then click on on the Delete Encap button.
6.2.3 Add a VCC
To add a VCC entry, complete the following steps:
STEP 1: Click on the Add VCC button; the VCC screen will appear.
STEP 2: Enter values for the parameters (explained below).
STEP 3: Click on the Apply button at the bottom of the page.
Field
vpi:
vci:
Peak Cell rate
(cells/sec):
Average Cell rate
(cells/sec):
Burst size (cells):
CDVT (cells):
Type:
Description
Virtual Path Identifier (VPI) that identifies this ATM
connection. The vpi is an integer number which can range
from 0 to 4095.
Virtual Channel Identifier (VCI) that identifies this ATM
connection. The vci is an integer number which can range
from 0 to 65,535.
Defines the fastest rate a user can send cells to the network.
It is expressed in units of cells per second.
Defines the maximum sustainable/average rate a user can
send cells to the network. It is expressed in cells per second.
This specifies the bandwidth utilization. This value must
always be less than or equal to the Peak Cell Rate.
Maximum number of cells the user can send at the peak rate
in a burst, within a sustainable rate.
Constrains the number of cells the user can send to the
network at the maximum line rate.
Select data or voice
45