Dhcp Relay Nat - Paradyne 1862 User Manual

1862 VoIP IAD User's Guide
STEP 2: In the DHCP Relay field, select Disable, and enter the IP Address where you want
BOOT REQUEST or DHCP packets to be received from clients.
STEP 3: Click on the Apply button.
6.6 NAT
The NAPT port redirect page is used to set up the virtual server. A virtual server has two access
ports: public and private. The public port is the open port where the Internet users access the
virtual server. The local port is the port on the LAN that the virtual server is really accessed. The
public port is translated to the local port to access to the virtual server.
Click on the Add button to add a virtual server. The following page displays after you click on
on Add.
Public Port
Protocol
Local Address
Local Port
Enter the public port number. This port will be mapped or
redirected to the local port of the virtual on the LAN. Internet
users access the virtual server via the public port.
Specify the protocol: TCP or UDP.
Enter the IP address of the virtual server on the LAN.
Enter the port number of the virtual server on the LAN.
53