Ping - Paradyne 1862 User Manual

8.2

Ping

A Ping test is used to verify the status of a network connection after the RIP or static route
function is enabled. Ping sends a request message to the host and waits for a return message.
This diagnostic function can verify if the remote host is reachable. Ping can also measure the
round-trip time to the remote host.
To access the Ping test screen, click on the Ping tab on the Diagnostics screen.
Enter the Host Name or IP address of the remote terminal and click on Submit to start the ping
and display the results.
The following is an example of the ping result. The information is as follows:
Packets transmitted:
Packets received:
Packets lost:
Minimum round trip time:
Maximum round trip time:
62
The number of packets that were transmitted
The number of packets that were received
The number of packets lost
The fastest round-trip time
The slowest round-trip time
1862 VoIP IAD User's Guide