Chapter 8 Diagnostics; Oam Loopback - Paradyne 1862 User Manual

1862 VoIP IAD User's Guide
Chapter 8
To access the Diagnostics screen, click on the Diagnostics button, which is located on the menu
bar. The Diagnostics screen has two test functions: OAM Loopback and Ping test.
8.1

OAM Loopback

STEP 1: Click on the Diagnostics button, on the menu bar.
STEP 2: Click on the Loopback tab on the Diagnostics screen.
STEP 3: Enter the following information to run the OAM loopback:
Flow type: F5 SEG (Segment to Segment) and F5 ETE (End-to-End). The SEG loopback is
from ATUR to DSLAM. The ETE loopback is from ATUR to the ISP RAS.
VPI and VCI: Specify the virtual channel that will run the OAM loopback.
Loopback ID: Type the loopback pattern for the loopback
STEP 4: Click on the Start Loopback button at the bottom of the screen.
Diagnostics
61