1862 VoIP IAD User's Guide
6.3
ADSL Mode
There are four ADSL modes: MULTI, ANSI, G.DMT, and G.LITE. The default ADSL mode is
ANSI. MULTI mode enables the device to auto-adjust its mode to match the remote Central
Office (CO) DSL Access Multiplexer (DSLAM). You can specify an ADSL mode on this page,
and click on on the Apply button to submit the settings.
6.4
DHCP
The Dynamic Host Configuration Protocol (DHCP) provides a centralized approach to allocating
IP addresses. It allows IP addresses to be dynamically assigned on a need to basis, from a pool of
addresses. The DHCP server is disabled by factory default.
6.4.1
Enable DHCP
STEP 1: Click on DHCP Server/Relay on the menu bar. There is a default DHCP entry on the
screen. The default settings are as follows:
STEP 2: To enable the DHCP entry, chose the entry and click on on the Start button. A Stop
button will display on the screen as follows.
49