Paradyne 1862 User Manual page 43

1862 VoIP IAD User's Guide
The following is displayed when you select eth0 and click on the Configure Interface button.
6.1.2 DNS & Default Gateway:
To configure the DNS and default gateway, complete the following steps:
STEP 1:
Click on Interface Configure in the menu bar.
STEP 2:
Click on the DNS and default gateway button at the bottom of the configuration page.
STEP 3:
Complete the fields below:
Domain Name: User-defined
Primary DNS server: Enter the primary server IP address.
Secondary DNS server: Enter the secondary server IP address that will be used in the event
that the primary server IP address fails or is not available.
43