Net to Net Technologies SIA2410R User Manual page 55

Command
2> Reboot the SIA2410R to load new firmware to memory.
Command
When the download process is competed, reset your unit. If
downloading was not successfully completed or a wrong file was
downloaded, the system reboot will not complete successfully. In
such a case, turn the router power switch off and on, and retry
the downloading.
3> Verify the version of the new firmware using following command :
Command
STEP4> Saving new version to Flash memory
1> Save the downloaded new firmware to Flash memory. When a
confirmation message appears in the screen, press "y". The file
not saved in Flash memory will be lost or damaged when the
system is rebooted.
Command
2> Verify new version using following command:
Command
Note: If the connection to TFTP is not successful even after the TFTP
command was entered, check if the Ethernet communication is live
between the PC and router or if the TFTP server program is running.
Net To Net Technologies
Net To Net Technologies SIA2410R User Manual
write config
reboot tftp
(conf)# show version
~
System Software Release:
3.7.13 [Mon Jan 28 10:16:20 2002] running
new version
3.7.12 [Mon Dec 17 16:19:42 2001] saved
old version
(conf)# write tftp
(conf)# show version
~
System Software Release:
3.7.13 [Mon Jan 28 10:16:20 2002] running
new version
3.7.13 [Mon Jan 28 10:16:20 2002] saved
new version
54