Rebooting The System - Net to Net Technologies SIA2410R User Manual

Rebooting the system

Unplugging and subsequent plugging of the power source adapter for
SIA2410R triggers a reboot of the system hardware. The following command
is available to perform a software reboot of the system.
Command
Note: Before rebooting the system, you must save current configuration to
Flash memory.
configuration. This is because SIA2410R router configures the system
based on the values stored in Flash memory.
Net To Net Technologies
Net To Net Technologies SIA2410R User Manual
reboot flash
Otherwise, the system will lose the running
31