Net to Net Technologies SIA2410R User Manual page 22

Setting Encapsulation
The SIA2410R must be configured to use the 'ntnhdlc' encapsulation
mode. This is the default setting and should not be changed.
Command interface wan encap ntnhdlc
Usage examples (conf)# interface wan encap ntnhdlc
Viewing configuration for the WAN interface
Up/Down status, IP address, routing or bridge mode status,
encapsulation is displayed.
To display the WAN interface configuration, use the following
command:
Command show interface [-v|-c] [<ifname>]
-v
Parameters -c
<ifname>
(conf)# show interface wan
Usage Examples (conf)# show interface -v wan
(conf)# show interface –c wan
Note: To display all interfaces, use "show interface" command.
Net To Net Technologies
Net To Net Technologies SIA2410R User Manual
shows full statistics
initializes the statistics
interface name
21