Net to Net Technologies SIA2410R User Manual page 26

Disabling the RIP from the interface
Command
Parameters
Usage
Receiving and transmitting the default gateway
The default route specifies a static route to another IP router, which is
often a local router. When the rxdefault is set to disable, RIP updates
will not change the default route entry in the SIA2410R routing table.
Command rip enable|disable <ifname> rxdefault|txdefault
<ifname>
rxdefault
Parameters
txdefault
(conf)# rip enable wan rxdefault txdefault
Usage examples
(conf)# rip disable wan rxdefault txdefault
Sending RIP information manually to the specified interface
Command rip send <ifname> v1|v2
Parameters <ifname>
Usage example (conf)# rip send wan v2
Net To Net Technologies
Net To Net Technologies SIA2410R User Manual
rip disable <ifname> rxrip1|txrip1|rxrip2|txrip2
<ifname> interface name
rxrip1|txrip1 receives and transmits RIP1 updates
rxrip2|txrip2 receives and transmits RIP2 updates
(conf)# rip disable wan rxrip2 txrip2
interface name
receives a default gateway using RIP updates
transmits a default gateway using RIP updates
Interface name
25