Net to Net Technologies SIA2410R User Manual page 31

The default configuration is as follows:
SIA2410R(conf)# sh config
#
# System Configuration:
# boot status: system configuration checksum OK.
mac-address 00:d0:84:00:ff:f2
console-baudrate 9600
hostname SIA2410R
#
device local none(0)
device lan 10base-t
device wan gshdsl(annex-a) RT auto
#
interface local ip 127.0.0.1 255.0.0.0
encapsulation NULL
interface lan ip unnumbered
bridge enabled
encapsulation ETHERNET
interface wan ip unnumbered
bridge enabled
encapsulation NTNHDLC
#
#
#
#
#
#
SIA2410R(conf)#
SIA2410R(conf)# sh int
Interface: lan, status <UP>, mtu 1500
ip address unnumbered
Bridging-only mode
ether 00:d0:84:00:ff:f2, speed 100 Mbps full-duplex
Interface: wan, status <DOWN>, mtu 1500
ip address unnumbered
Bridging-only mode
encapsulation NTNHDLC, ether 00:d0:84:00:ff:f2
idle-char FLAG, RT speed -/- Kbps
SIA2410R(conf)#
Net To Net Technologies
Net To Net Technologies SIA2410R User Manual
30