Changing A Password - Net to Net Technologies SIA2410R User Manual

1. If you enter the correct password, the command-line prompt appears
as follows:
SIA2410R(conf)#
2. To exit the configuration mode, enter the Exit command at the prompt:
SIA2410R(conf)# exit
Note: The default password must be typed in lower case. If the properly
typed default password does not work, check whether the 'Caps Lock'
key is pressed or not.

Changing a Password

Both the 'login' and the 'configuration' mode passwords may be
changed from the configuration mode. It is advised that both
passwords be changed as part of the configuration process to prevent
unauthorized access.
Changing a password for Login Mode.
Command
Usage Examples
Changing a password for Configuration Mode.
Command
Usage Examples
Net To Net Technologies
Net To Net Technologies SIA2410R User Manual
passwd
SIA2410R(conf)# passwd
Enter login password:xxxx
New password:yyyy
Re-enter new password:yyyy
passwd config
SIA2410R(conf)# passwd config
Enter config password:xxxx
New password:yyyy
Re-enter new password:yyyy
15