Configuring The Arp Table - Net to Net Technologies SIA2410R User Manual

Viewing the RIP configuration
Displays the current RIP configuration
Command show rip
(conf)# sh rip
wan: txrip2 rxrip2
Usage example lan: disabled
(conf)#
Viewing the RIP updates :
Command show ip route
(conf)# sh ip route
destination
---------------------------------------------------------------------
Usage example
210.10.10.0
168.126.188.0 255.255.255.0
(conf)#

Configuring the ARP Table

ARP (Address Resolution Protocol) is a protocol designed to acquire
information on the mapping between an IP address and a physical MAC
address. The internal cache of the router contains the ARP table for mapping
between the IP addresses and MAC addresses, this ARP table is dynamically
configured and updated with broadcast packets. The "arp" command is
available to set up fixed mapping information for the IP and MAC addresses.
Net To Net Technologies
Net To Net Technologies SIA2410R User Manual
netmask gateway
255.255.255.0 210.10.10.1
168.126.188.130
met ifname type
1 wan rip(175)
0 lan connected
26