Table of Contents
Advertisement
10.14 Flex brightness
This feature is available by default on the following devices: UDM 4k22, UDM W22.
This feature is also available as an option on the following devices: UDM 4K15, UDM W19, UDM
W15.
Overview
With the FLEX technology the projector owners can lock the light output to different levels. The locking can be
done via 3 different ways:
•
Via Projector Toolset when connected via an Ethernet connection with the projector. See Projector
Toolset's user guide, chapter ""FLEX codes setup"".
•
Via the OSD menu of the projector itself
•
Via an SMS message send to a projector equipped with an optional GSM board.
To lock to a specific value a 4 digit code is necessary; These codes can be created by the projector owner
using Projector Toolset.
Availability
The flex brightness function is license protected. This license is already available in the projector. To activate
the flex brightness a flex code is necessary. This flex code can be requested for free and uploaded via
Projector Toolset. For more information about uploading this flex code, see Projector Toolset's user guide,
chapter ""FLEX, light output control"".
For other models, Flex brightness is an option. You can order and buy a license file. This license file is linked
with the projector type and projector serial number. Once you received you license file, upload this file via
Projector Toolset to your projector. Once the file is uploaded, the same file has to be used to upload the Flex
code.
Flex codes
Once your flex code is correctly uploaded, the projector creates a number of flex codes, one for each possible
maximum light output. These codes are used for rental activities when adapting the light output of the
projector.
The created flex codes are only visible in Projector Toolset by the projector owner. To make these visible he
will need his license for this typical projector.
How to configure?
1.
Create a new text message containing 3 parts, each separated with a space character:
•
Activation code (created using Projector Toolset)
•
Action string
•
Action parameter
Example: "1234 MLO 14"
2.
Send this message to the GSM number associated with the projector.
The receiving projector will analyze the message and configure the light output accordingly. A result
message is sent back to the requested cell phone.
Maximum Light output setup via OSD menu
1.
In the main menu, select Settings → Maintenance → Flex.
GUI – System Settings
R5911443 /03
UDM
141
Advertisement
Table of Contents
