Table of Contents
Advertisement
Image 8–58 Blend menu, Blend mask
The Blend mask menu is displayed.
Image 8–59 Example of the blend mask menu
2.
To enable the blend mask, put the Enable slider to the right. The color of the slider becomes blue when
enabled.
3.
To project masking lines on the screen, put the Show lines slider to the right. The color of the slider
becomes blue when enabled.
4.
Determine the start position of the mask (1) for the masking height and width, together with the desired
size of the mask (2) to determine the width of the masked area.
When the helping lines are activated, you will get a visual indication of the screen of the installed blending
area.
GUI – Installation
R5911443 /03
UDM
101
Advertisement
Table of Contents
