Table of Contents
Advertisement
Connection of the control air (see „Fig. 12")
→
Connect the control air to the control air port (1) of the cont-
roller Type 869x.
→
Mount an exhaust air line or a silencer to the exhaust air port (3).
If used in an aggressive environment, we recommend
conveying all free pneumatic connections into a neutral
atmosphere with the aid of a pneumatic hose.
Fig. 12: Pneumatic connections (for Types 8696, 8694, 8692/3)
8.6.
Electrical installation
WARNING!
Risk of injury from electric shock!
▶ Before reaching into the device or the system, switch off the
power supply and secure to prevent reactivation!
▶ Observe applicable accident prevention and safety regulati-
ons for electrical equipment!
Type 2380
Installation
control air
control air
(port 1)
(port 1)
and
and
exhaust air
exhaust air
(port 3)
(port 3)
The electrical connection depends on the controller Type 869x
used.
The electrical connection of Type 2380 is described in the
respective operating instructions of Type 869x controllers
on our website www.burkert.com.
8.7.
Communication software
The PC software "Bürkert Communicator" is designed for communi-
cation with Bürkert devices.
A detailed description for the installation and operation the
software can be found in the associated operating instruc-
tions - search for Type 8920 („Bürkert Communicator").
Download the software and respective operating instructions for
Type 8920 from: www.burkert.com.
Follow the descriptions in the respective operating instructions
for Type 869x and 8920:
→
First install the „Bürkert Communicator" software on the PC
→
Connect the Type 869x to a PC - for that purpose you need a
special USB adapter set mentioned in chapter „Accessories"
in the respective operating instructions for Type 869x.
english
15
Advertisement
Table of Contents
Troubleshooting
